Industry Advice

/

November 12, 2026

Lamp post banners: what size they are, who has to say yes, and when they're worth it

Lamp post banners are 800 × 2000mm and need the council's or landowner's OK. What to check first, how to design for the street, and when to skip them.

Blog Image

That's the whole answer in a paragraph. The rest of this is the thinking behind it, because a lamp post banner is one of those jobs that looks simple and then has three ways to go wrong.

What size is a lamp post banner?

Ours are 800 × 2000mm. Tall and narrow, roughly two and a half times taller than wide, which matters more for your design than the actual millimetres (more on that below).

Each kit comes with:

  • a double-sided banner on 740gsm blockout PVC, with pole pockets top and bottom
  • weatherproof brackets made from aluminium castings and GRP tubes, with adjustable height
  • two wind slits and two securing eyelets, fitted as standard
  • extra-large jubilee clips to fix the brackets to the lamp post

"Blockout" just means the material is opaque. That's why a double-sided banner works at all. Without it, the design on the back ghosts through the front the moment the sun is behind it, and both sides look muddy.

You'll see other sizes advertised elsewhere, and bespoke ones exist. If you need something different, ask for a quote rather than trying to make a standard bracket fit a non-standard banner.

Do you need permission to put a banner on a lamp post?

Usually, yes. And I'd treat this as the first job, not the last.

Lamp posts on public roads belong to the local council or the highway authority. Fit a banner without their consent and you're advertising on someone else's property. At best it comes down. At worst you've paid for a set of banners and brackets you can't use.

So, before you spend anything:

  • A public road or high street: The local council or highway authority
  • A retail park, business park or car park: The landowner or site management
  • A university or college campus: The estates or facilities team
  • Your own land: You, though it's still worth checking any local planning rules

Some town centres have a business improvement district or a council team that already manages banner sites. If that's the case where you are, they'll know which posts can take a bracket, whether they need to fit it themselves, and how long a campaign can stay up. One phone call saves a lot of guesswork.

We don't pretend to be the authority on your council's rules. They vary, and only they can give you the yes. What we can do is make sure that when the yes comes, the banner is ready.

Is lamp post advertising worth it?

It depends on what you're trying to do. Lamp post banners are brilliant at one thing and poor at another.

They're brilliant at presence. A row of matching banners down a street tells everyone walking or driving through that something is happening here. A festival. A Christmas market. A new campus building. A shopping centre that wants to feel like a destination. Repetition does the work. One banner is a sign. Twelve is an event.

They're poor at detail. Nobody is reading a phone number off a banner three metres up while they're driving past. If your plan relies on people remembering a web address or a long offer, a lamp post isn't the place for it.

That's why the people who get the most out of them are councils, town-centre partnerships, event organisers, universities and retail parks. A single shop on a high street can do it too, but only if the council will allow it and there's a reason for the banners to be there.

The other thing in their favour: the brackets stay up from one campaign to the next. When the season changes, you only replace the banner. Spring, summer, Christmas. Same brackets, new message.

How to design a banner people read from below

This is where most lamp post banners lose. They're designed on a laptop screen at arm's length, and then they're seen from the pavement, at an angle, from a distance, often for a couple of seconds.

A few things I'd hold firm on:

  • One message. A name, an event, a date. That's often plenty.
  • A big logo. If people only take one thing away, make it who you are.
  • High contrast. Dark on light or light on dark. Mid-tones on mid-tones disappear against a grey sky.
  • Keep clear of the top and bottom edges. The pole pockets run along both, so anything you put there gets swallowed by the brackets.
  • No fine detail where the wind slits fall. The slits let wind pass through rather than push against the banner like a sail. Put a line of small text across one and it's gone.
  • Use both sides properly. Because the banner is double-sided, you can supply a different design for each side. Some people use that to say "Welcome to" on one side and "Thanks for visiting" on the other.

Build your artwork on the 800 × 2000mm template from the product page, and supply a CMYK PDF with fonts outlined or embedded. If you'd rather not do the design yourself, our studio can set the file up or design it from scratch, and we'll quote before you commit.

What if the council says no?

It happens. And it doesn't mean you can't get your message into the street.

Two alternatives we'd look at first:

Bollard covers. If there's a car park or forecourt involved, the bollards are already standing exactly where customers walk. Printed bollard covers are 4mm Correx, come in 800mm, 1000mm or 1200mm heights, and wrap around the bollard with tabs. No tape, no tools. Triangle covers give you three faces, square ones give you four. Measure your bollard at its widest point before you order, because bollards are not a standard size.

A banner on your own building or fence. If the lamp post was really about being seen from the road, a custom PVC banner on your own frontage, railings or fence often does the same job without anyone else's sign-off on the post itself. It's 440gsm PVC, printed in full colour to whatever width and height you enter, with hems, eyelets or pole pockets. One thing to know: it's single-sided, so if you need a double-sided banner, ask about blockout PVC instead.

Neither of these is a lamp post banner. But a message on a bollard you're allowed to use beats a banner you're not.

A quick checklist before you order

  • Permission confirmed, in writing, from the council, highway authority or landowner
  • Number of posts agreed (and whether they need the brackets fitted by their own contractor)
  • Wall or post? Wall mounting needs plugs and bolts to suit your wall, bought separately
  • Artwork built on the 800 × 2000mm template, big and simple, clear of the pole pockets
  • Both sides designed, even if it's the same design twice
  • A date in mind? Tell us when you order and we'll confirm before we print

Get the permission right and the rest is straightforward. Get it wrong and the best design in the world ends up in a cupboard.

When you're ready, our lamp post banner kits include the banner, brackets and clips together. If you've got the yes but not the artwork, our design team can take it from there.

‍

Author Image
Bradley Leivars CMCIM
Director of Printlogik

Get Your Print Right First Time

Every order is checked by a real print expert.

✔ Fast turnaround
✔ No guesswork
✔ No wasted spend

Order with Confidence

Trusted by UK businesses every day

Ready to grow your business with better print?

  • Premium quality marketing materials
  • Fast turnaround & reliable delivery
  • Better pricing for business customers
  • Expert support from Print specialists